器件名称: 74ALVC541
功能描述: Octal buffer/line driver; 3-state
文件大小: 90.7KB 共15页
简 介:74ALVC541
Octal buffer/line driver; 3-state
Rev. 02 — 5 November 2007 Product data sheet
1. General description
The 74ALVC541 is an octal non-inverting buffer/line drivers with 3-state bus compatible outputs. The 3-state outputs are controlled by the output enable inputs OE0 and OE1. A HIGH on OEn causes the outputs to assume a high-impedance OFF-state.
2. Features
s Wide supply voltage range from 1.65 V to 3.6 V s Complies with JEDEC standard: x JESD8-7 (1.65 V to 1.95 V) x JESD8-5 (2.3 V to 2.5 V) x JESD8B/JESD36 (2.7 V to 3.6 V) s 3.6 V tolerant inputs/outputs s CMOS low power consumption s Direct interface with TTL levels (2.7 V to 3.6 V) s Power-down mode s Latch-up performance exceeds 250 mA s ESD protection: x HBM JESD22-A114E exceeds 2000 V x MM JESD22-A115-A exceeds 200 V
3. Ordering information
Table 1. Ordering information Package Temperature range 74ALVC541D 74ALVC541PW 74ALVC541BQ 40 °C to +85 °C 40 °C to +85 °C 40 °C to +85 °C Name SO20 TSSOP20 DHVQFN20 Description plastic small outline package; 20 leads; body width 7.5 mm plastic thin shrink small outline package; 20 leads; body width 4.4 mm plastic dual-in-line compatible thermal enhanced very thin quad at package no leads; 20 terminals; body 2.5 × 4.5 × 0.85 mm Version SOT163-1 SOT360-1 SOT764-1 Type number
NXP Semiconductors
74ALVC541
Octal buffer/line driver; 3-state
4. Functional diagram
A0 Y0
2
18
3
A1
Y1
17
4
A2
Y2
16
5
A3
Y3
15
6
A4
Y4
14
1 19
&
EN 18 17 16 15 14 13 12 11
mna……