器件名称: AT26DF041
功能描述: 4-MEGABIT 3.0-VOLT ONLY OR 2.7-VOLT ONLY SERIAL FIRMWARE DATAFLASH-R
文件大小: 553.16KB 共20页
简 介:Features
Single 3.0V - 3.6V or 2.7V - 3.6V Supply Serial Peripheral Interface (SPI) Compatible 33 MHz Max Clock Frequency Byte Program Operation Page Program Operation – 2048 Pages (256 Bytes/Page) Main Memory – Single Cycle Reprogram Capability (Page Erase and Program) Supports Optional Page and Block (2 KB or 4 KB) Erase Operations Continuous Read Capability through Entire Array – Ideal for Code Shadowing Applications Hardware Data Protection Feature for the Top 64 KB of Memory Low Power Dissipation – 4 mA Active Read Current Typical – 2 A CMOS Standby Current Typical 5.0V-tolerant Inputs: SI, SCK, CS, and WP Pins 100,000 Program/Erase Cycles Typical Data Retention – 20 years
4-megabit 3.0-volt Only or 2.7-volt Only Serial Firmware DataFlash AT26DF041
1. Description
The AT26DF041 is a 3.0-volt or 2.7-volt only, serial interface Flash memory ideally suited for a wide variety of program code- and data-storage applications. Its 4,194,304 bits of memory are organized as 2048 pages of 256 bytes each. Unlike conventional Flash memories that are accessed randomly with multiple address lines and a parallel interface, the DataFlash uses an SPI serial interface to sequentially access its data. The DataFlash supports SPI mode 0 and mode 3. The simple serial interface facilitates hardware layout, increases system reliability, minimizes switching noise, and reduces package size and active pin count. The device is optimized for use in many commercial and industrial applic……
