EEPW首页 | 器件索引 | 厂商列表 | IC替换 | 微缩略语 | 电路图查询
器件查询:
400万器件资料库等您来搜!
   首页 > WINBOND > W39V040FAT

W39V040FAT

器件名称: W39V040FAT
功能描述: 512K X 8 CMOS FLASH MEMORY WITH FWH INERFACE
文件大小: 518.43KB    共36页
生产厂商: WINBOND
下  载:    在线浏览   点击下载
简  介:W39V040FA 512K × 8 CMOS FLASH MEMORY WITH FWH INTERFACE 1. GENERAL DESCRIPTION The W39V040FA is a 4-megabit, 3.3-volt only CMOS flash memory organized as 512K × 8 bits. For flexible erase capability, the 4Mbits of data are divided into 8 uniform sectors of 64 Kbytes, which are composed of 16 smaller even pages with 4 Kbytes. The device can be programmed and erased insystem with a standard 3.3V power supply. A 12-volt VPP is not required. The unique cell architecture of the W39V040FA results in fast program/erase operations with extremely low current consumption. This device can operate at two modes, Programmer bus interface mode and FWH bus interface mode. As in the Programmer interface mode, it acts like the traditional flash but with a multiplexed address inputs. But in the FWH interface mode, this device complies with the Intel FWH specification. The device can also be programmed and erased using standard EPROM programmers. 2. FEATURES Single 3.3-volt operations: Hardware protection: 3.3-volt read 3.3-volt erase 3.3-volt program Fast Program operation: Optional 16K byte or 64K byte Top Boot Block with lockout protection #TBL & #WP support the whole chip hardware protection Flexible 4K-page size can be used as Byte-by-Byte programming: 35 S (typ.) Fast erase operation: Parameter Blocks Low power consumption Chip erase 100 mS (max.) Sector erase 25 mS (max.) Page erase 25 mS (max.) Fast Read access time: Tkq 11 nS Endurance: 10K cycles (typ.) Twenty-y……
相关电子器件
器件名 功能描述 生产厂商
W39V040FAT 512K X 8 CMOS FLASH MEMORY WITH FWH INERFACE WINBOND
《电子产品世界》杂志社 版权所有 北京东晓国际技术信息咨询有限公司
Copyright ©2002 ELECTRONIC ENGINEERING & PRODUCT WORLD. All rights reserved.
京ICP备12027778号-2