EEPW首页 | 器件索引 | 厂商列表 | IC替换 | 微缩略语 | 电路图查询
器件查询:
400万器件资料库等您来搜!
   首页 > WINBOND > W39V040A

W39V040A

器件名称: W39V040A
功能描述: 512K
文件大小: 369.56KB    共34页
生产厂商: WINBOND
下  载:    在线浏览   点击下载
简  介:W39V040A 512K × 8 CMOS FLASH MEMORY WITH LPC INTERFACE 1. GENERAL DESCRIPTION The W39V040A is a 4-megabit, 3.3-volt only CMOS flash memory organized as 512K × 8 bits. For flexible erase capability, the 4Mbits of data are divided into 8 uniform sectors of 64 Kbytes, which are composed of 16 smaller even pages with 4 Kbytes. The device can be programmed and erased in-system with a standard 3.3V power supply. A 12-volt VPP is not required. The unique cell architecture of the W39V040A results in fast program/erase operations with extremely low current consumption. This device can operate at two modes, Programmer bus interface mode and LPC bus interface mode. As in the Programmer interface mode, it acts like the traditional flash but with a multiplexed address inputs. But in the LPC interface mode, this device complies with the Intel LPC specification. The device can also be programmed and erased using standard EPROM programmers. 2. FEATURES Single 3.3-volt Operations: 3.3-volt Read 3.3-volt Erase 3.3-volt Program Hardware protection: Optional 16K byte or 64K byte Top Boot Block with lockout protection #TBL & #WP support the whole chip hardware protection Fast Program Operation: Byte-by-Byte programming: 35 S (typ.) Flexible 4K-page size can be used as Parameter Blocks Low power consumption Active current: 12.5 mA (typ. for LPC mode) Automatic program and erase timing with internal VPP generation End of program or erase detection Toggle bit Data polling Fas……
相关电子器件
器件名 功能描述 生产厂商
《电子产品世界》杂志社 版权所有 北京东晓国际技术信息咨询有限公司
Copyright ©2002 ELECTRONIC ENGINEERING & PRODUCT WORLD. All rights reserved.
京ICP备12027778号-2