器件名称: TMP86CM29B
功能描述: CMOS 8-Bit Microcontroller
文件大小: 292.97KB 共8页
简 介:TMP86FM29
Comparison table of TMP86C829B/H29B/M29B/PM29A/PM29B/C929AXB and TMP86FM29
TMP86C829B TMP86CH29B TMP86CM29B ROM 8 K (Mask ROM) 16 K (Mask ROM) 32 K (Mask ROM) 512 1.5 K 1.5 K 42 pin 5 pin 10-bit AD converter × 8 ch 18-bit timer × 1 ch 8-bit timer × 4 ch 8-bit UART / SIO × 1 ch 32 seg × 4 com 4 ch 1.8 to 5.5 V at 4.2 MHz 2.7 to 5.5 V at 8 MHz 4.5 to 5.5 V at 16 MHz 40 to 85℃ N/A 1.8 to 5.25 V at 4.2 MHz 2.7 to 5.25 V at 8 MHz 4.5 to 5.25 V at 16 MHz 0 to 60°C TMP86PM29A TMP86PM29B TMP86C929AXB (Emulation chip) (Note 3) TMP86FM29F
Difference
32 K (OTP)
32 K (Flash)
RAM I/O External Interrupt AD Converter Timer Counter Serial Interface LCD Key-on Wakeup Operating Voltage in MCU Mode Operating Temperature in MCU Mode Writing to Flash Memory CPU Wait (Note 1)
1.5 K
42 pin (MCU part)
2K 42 pin 5 pin 10-bit AD converter × 8 ch 18-bit timer × 1 ch 8-bit timer × 4 ch 8-bit UART / SIO × 1 ch 32 seg × 4 com (Note 2) 4 ch 1.8 to 3.6 V at 4.2 MHz (External clock) 1.8 to 3.6 V at 8 MHz (Resonator) 2.7 to 3.6 V at 16 MHz 40 to 85°C 2.7 to 3.6V at 16 MHz 25°C ± 5°C Available
Note 1: The CPU wait is a CPU halt function for stabilizing of power supply of Flash memory. The CPU wait period is as follows. In the CPU wait period except RESET, CPU is halted but peripheral functions are not halted. Therefore, if the interrupt occurs during the CPU wait period, the interrupt latch is set. In this case, if the IMF has been set to “1”, the interrupt service routine is executed aft……
