器件名称: MSK4400D
功能描述: 10 AMP, 75V, 3 PHASE MOSFET BRIDGE WITH INTELLIGENT INTEGRATED GATE DRIVE
文件大小: 275.55KB 共5页
简 介:ISO 9001 CERTIFIED BY DSCC
M.S.KENNEDY CORP. FEATURES:
10 AMP, 75V, 3 PHASE MOSFET BRIDGE WITH INTELLIGENT INTEGRATED GATE DRIVE
4400
(315) 701-6751
4707 Dey Road Liverpool, M/Y. 13088 75 Volt Motor Supply Voltage 10 Amp Output Switch Capability, All N-Channel MOSFET Output Bridge 100% Duty Cycle High Side Conduction Capable Suitable for PWM Applications from DC to 100KHz Shoot-Through/Cross Conduction Protection Undervoltage Lockout Protection Programmable Dead-Time Control Low Active Enable for Bridge Shutdown Control Isolated Base Plate Design for High Voltage Isolation Plus Good Thermal Transfer
DESCRIPTION:
The MSK 4400 is a 3 phase MOSFET bridge plus drivers in a convenient isolated baseplate package. The module is capable of 10 amps of output current and 75 volts of DC bus voltage. It has a full line of protection features, including undervoltage lockout protection of the bias voltage, cross conduction control and a user programmable dead-time control for shoot-through elimination. In addition, the bridge may be shut down by using the ENABLE control. The MSK 4400 provides good thermal conductivity for the MOSFETs due to an isolated plate design that allows direct heat sinking of the device without insulators.
EQUIVALENT SCHEMATIC
TYPICAL APPLICATIONS
3 Phase Brushless DC Servo Control Fin Actuator Control Gimbal Control 3 Phase AC Induction Motor Control HVAC Blower Control 1 2 3 4 5 6 7 8 9 10
PIN-OUT INFORMATION
N/C N/C N/C BH BL AL AH GND SWR VBIAS 20 19 18……
