器件名称: MSK4360S
功能描述: 10 AMP, 55V, 3 PHASE MOSFET BRUSHLESS MOTOR CONTROLLER
文件大小: 294.15KB 共7页
简 介:ISO 9001 CERTIFIED BY DSCC
M.S.KENNEDY CORP.
4707 Dey Road Liverpool, N.Y. 13088
10 AMP, 55V, 3 PHASE MOSFET BRUSHLESS MOTOR CONTROLLER
4360
(315) 701-6751
FEATURES:
55 Volt Motor Supply Voltage 10 Amp Output Switch Capability 100% Duty Cycle High Side Conduction Capable Shoot-Through/Cross Conduction Protection Hall Sensing and Commutation Circuitry on Board Internal ±15 Volt Regulators "Real" Four Quadrant Torque Control Capability Good Accuracy Around the Null Torque Point Isolated Package for High Voltage Isolation Plus Good Thermal Transfer
MIL-PRF-38534 QUALIFIED
DESCRIPTION:
The MSK 4360 is a complete 3 Phase MOSFET Bridge Brushless Motor Control System in an electrically isolated hermetic package. The hybrid is capable of 10 amps of output current and 55 volts of DC bus voltage. It has the normal features for protecting the bridge. Included is all the bridge drive circuitry, hall sensing circuitry, commutation circuitry and all the current sensing and analog circuitry necessary for closed loop current mode (torque) control. When PWM'ing, the transistors are modulated in locked anti-phase mode for the tightest control and the most bandwidth. Provisions for applying different compensation schemes are included. The MSK 4360 has good thermal conductivity of the MOSFET's due to isolated substrate/package design that allows direct heat sinking of the hybrid without insulators.
EQUIVALENT SCHEMATIC
TYPICAL APPLICATIONS
3 Phase Brushless DC Motor Control Servo Contr……