EEPW首页 | 器件索引 | 厂商列表 | IC替换 | 微缩略语 | 电路图查询
器件查询:
400万器件资料库等您来搜!
   首页 > STMICROELECTRONICS > M74ACT574TTR

M74ACT574TTR

器件名称: M74ACT574TTR
功能描述: OCTAL D-TYPE FLIP FLOP WITH 3 STATE OUTPUT NON INVERTING
文件大小: 77.87KB    共11页
生产厂商: STMICROELECTRONICS
下  载:    在线浏览   点击下载
简  介: 74ACT574 OCTAL D-TYPE FLIP FLOP WITH 3 STATE OUTPUT NON INVERTING s s s s s s s s s HIGH SPEED: fMAX = 250 MHz (TYP.) at VCC = 3.3V LOW POWER DISSIPATION: ICC = 8 A (MAX.) at TA = 25 oC COMPATIBLE WITH TTL OUTPUTS VIH = 2V (MIN), VIL = 0.8V (MAX) 50 TRANSMISSION LINE DRIVING CAPABILITY SYMMETRICAL OUTPUT IMPEDANCE: |IOH| = IOL = 24 mA (MIN) BALANCED PROPAGATION DELAYS: tPLH tPHL OPERATING VOLTAGE RANGE: VCC (OPR) = 4.5V to 5.5V PIN AND FUNCTION COMPATIBLE WITH 74 SERIES 574 IMPROVED LATCH-UP IMMUNITY DIP PACKAGE DIP SOP TSSOP SOP ORDER CODES T UBE M74ACT574B M74ACT574M TSSOP T& R M74ACT574MTR M74ACT574TTR DESCRIPTION The ACT574 is an advanced high-speed CMOS OCTAL D-TYPE FLIP FLOP with 3 STATE OUTPUT NON INVERTING fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology. These 8 bit D-Type flip-flops are controlled by a clock input (CK) and an output enable input (OE). On the positive transition of the clock, the Q outputs will be set to logic state that were setup at the D inputs. PIN CONNECTION AND IEC LOGIC SYMBOLS While the (OE) input is low, the 8 outputs will be in a normal logic state (high or low logic level) and while high level the outputs will be in a high impedance state. The output control does not affect the internal operation of flip flop; that is, the old data can be retained or the new data can be entered even while the outputs are off. The device is designed to interface directly High Speed CMOS system with TTL……
相关电子器件
器件名 功能描述 生产厂商
M74ACT574TTR OCTAL D-TYPE FLIP FLOP WITH 3 STATE OUTPUT NON INVERTING STMICROELECTRONICS
《电子产品世界》杂志社 版权所有 北京东晓国际技术信息咨询有限公司
Copyright ©2002 ELECTRONIC ENGINEERING & PRODUCT WORLD. All rights reserved.
京ICP备12027778号-2