器件名称: 74ALVCH162244
功能描述: 16-bit buffer/line driver with 30ohm termination resistor 3-State
文件大小: 90.82KB 共11页
简 介:INTEGRATED CIRCUITS
74ALVCH162244 16-bit buffer/line driver with 30 termination resistor (3-State)
Product specification IC24 Data Handbook 1998 Jun 29
Philips Semiconductors
Philips Semiconductors
Product specification
16-bit buffer/line driver with 30W termination resistor (3-State)
74ALVCH162244
FEATURES
Wide supply voltage range of 1.2V to 3.6V Complies with JEDEC standard no. 8-1A CMOS low power consumption MULTIBYTETM flow-through standard pin-out architecture Low inductance multiple VCC and ground pins for minimum noise
and ground bounce
PIN CONFIGURATION
1OE 1Y0 1Y1 GND 1Y2 1Y3 VCC 2Y0 2Y1 1 2 3 4 5 6 7 8 9 48 2OE 47 1A0 46 1A1 45 GND 44 1A2 43 1A3 42 VCC 41 2A0 40 2A1 39 GND 38 2A2 37 2A3 36 3A0 35 3A1 34 GND 33 3A2 32 3A3 31 VCC 30 4A0 29 4A1 28 GND 27 4A2 26 4A3 25 3OE
Direct interface with TTL levels Bus hold on all data inputs Integrated 30 termination resistor
DESCRIPTION
The 74ALVCH162244 is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families. The 74ALVCH162244 is a 16-bit non-inverting buffer/line driver with 3-State outputs. The device can be used as four 4-bit buffers, two 8-bit buffers or one 16-bit buffer. The 3-State outputs are controlled by the output enable inputs 1OE and 2OE. A HIGH on nOE causes the outputs to assume a high impedance OFF-state. The 74ALVCH162244 is designed with 30 series resistors in both HIGH and LOW output states. The 74ALVCH162244 has active bu……
