器件名称: W3011
功能描述: 1 GHz Quadrature Modulator
文件大小: 199.45KB 共18页
简 介:Data Sheet September 1999
W3011 1 GHz Quadrature Modulator
Features
+ Guaranteed performance at 2.7 V power supply + Output power of 3 dBm into 50 load (singleended) with 3 V operation + Direct RF modulation with or without offset mixer + Automatic power control (APC) capability + Accurate 90° phase shifter for carrier + Double-balanced active mixers minimize carrier feedthrough (origin offset) + Low-current sleep mode modulation of an RF carrier by I & Q baseband inputs. It is particularly suited for use in mobile and handheld cellular telephones designed to the IS-136 (North American 824 MHz to 849 MHz), PDC (Japan RCR-STD27 889 MHz to 958 MHz), and other digital personal-communications standards. The circuit block diagram is shown in Figure 1. From two LO signals, LOL and LOH, the offset mixer produces an internal LO signal, which prevents the external VCOs from being pulled by the large transmitted signal. The phase shifter splits the LO signal into two carriers with 90° phase separation and equal amplitude. These signals are fed to the in-phase (I) and quadrature-phase (Q) double-balanced mixers. The resulting signals are summed and fed into the output amplifier. This amplifier can provide 0 dBm linear output power, minimum, into a 50 load. The output power can be attenuated up to 50 dB by applying a control voltage to the APC input. Nominally, the output power is at maximum (+3 dBm) with VAPC > 2.2 V, and at minimum (–50 dBm) with VAPC < 0.8 V. A CMOS/TTL-compatible ……
