器件名称: ST2S06A33_09
功能描述: Dual synchronous rectification with reset or inhibit, 0.5 A, 1.5 MHz adjustable step-down switching regulator
文件大小: 296.85KB 共18页
简 介:ST2S06A33 ST2S06B
Dual synchronous rectification with reset or inhibit, 0.5 A, 1.5 MHz adjustable step-down switching regulator
Features
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Step-down current mode PWM (1.5 MHz) DC-DC converter Fixed or adjustable output voltage from 0.8 V 2% DC output voltage tolerance Synchronous rectification Reset function for A version Inhibit function for B version Internal soft start for start-up current limitation and power ON delay of 50-100 s Typical efficiency: > 90% 0.5 A output current capability Non-switching quiescent current: max 1 mA over temperature range RDS(ON) 150 mΩ (typ.) Uses tiny capacitors and inductors Available in QFN12L (4x4 mm) the power dissipation may cause a high heating of the application environment. It provides up to 0.5 A over an input voltage range of 2.5 V to 5.5 V. A high switching frequency of 1.5 MHz allows the use of tiny surface-mount components as well as a resistor divider to set the output voltage value. Only an inductor and two capacitors are required. A low output ripple is guaranteed by the current mode PWM topology and the utilization of low ESR SMD ceramic capacitors. The device is thermally protected and current limited to prevent damage due to accidental short circuit. The ST2S06 series is available in the QFN12L (4x4 mm) package.
QFN12L (4x4 mm)
Description
The ST2S06 is a dual step-down DC-DC converter optimized for powering low-voltage digital cores in ODD applications and, generally, to replace the high current ……