器件名称: I2781AG-08SR
功能描述: General Purpose EMI Reduction IC
文件大小: 184.42KB 共11页
简 介:October 2006 rev 1.6 General Purpose EMI Reduction IC
Features
Provides up to 15dB of EMI suppression FCC approved method of EMI attenuation Generates a 1X, 2X, and 4X low EMI spread spectrum clock of the input frequency Input frequency range from 3 to 78MHz External loop filter for spread % adjustment Spreading ranges from ±0.25% to ±5.0% Ultra low cycle-to-cycle jitter Zero-cycle slip 3.3V operating voltage range Ultra-low power CMOS design P278xA is available in 8 pin SOIC and TSSOP Packages Available for industrial and automotive temperature ranges.
P2781/82/84
reduces electromagnetic interference (EMI) at the clock source, which provides system wide reduction of EMI of all clock dependent signals. The P278xA allows significant system cost savings by reducing the number of circuit board layers and shielding that are traditionally required to pass EMI regulations. The P278xA uses the most efficient and optimized modulation profile approved by the FCC. The P278xA modulates the output of a single PLL in order to “spread” the bandwidth of a synthesized clock and, more importantly, decreases the peak amplitudes of its harmonics. This result in significantly lower system EMI compared to the typical narrow band signal produced by oscillators and most frequency generators. Lowering EMI by increasing a signal’s bandwidth is called spread spectrum clock generation.
Product Description
The P278xA is a versatile spread spectrum frequency modulator designed specifically……
