器件名称: 62201-6600
功能描述: Manual Ribbon Cable Standard Press and Tool Kit for SL
文件大小: 523.27KB 共1页
简 介:FEATURES AND SPECIFICATIONS
The Molex SL Ribbon Cable Terminator Kit is designed to be used in the Molex Manual Standard Press. This tool system terminates the SL IDT (Insulation Displacement Technology) 70400 and 70475 connectors onto pre-notched ribbon cable. This tool system provides an effective and flexible method of termination. The Molex Manual Press has a full-cycle ratchet arm which assures the quality of the termination. This tool system will also accommodate 2 to 25 circuits which provides flexibility. It also features adjustable cable guides and stop for repeatable cable and connector alignment. Operation: The operator loads a connector into the nest of the terminator kit (which is installed in the Molex Manual Standard Press), sets the cable stop and positions the cable over the terminals. The operator cycles the ratch arm on the press to complete the termination and then removes the harness. The terminals must be pushed into the housing by hand and then the carrier strip must be broken off by hand. The operation is complete. The product rate of this tool system is approximately 150 assemblies per hour depending on operator skill and application. Features and Benefits n Adjustable for 2 to 25 circuits, which provides for production flexibility n Tooling Termination Kit easily mounted in the Molex Manual Standard Press and can be quickly removed which will increase productivity and reduce change over time n Full-cycle ratch assures quality terminations n Adjustabl……
