器件名称: 61009M
功能描述: cylinder point distributors
文件大小: 743.7KB 共4页
简 介:FORM 1503 6/04
INSTALLATION INSTRUCTIONS
E-SPARK BREAKERLESS CONVERSION KIT
FOR MALLORY POINT DISTRIBUTORS
NOTE: This product is legal in California only for racing vehicles which may never be operated upon a highway.
IMPORTANT
All kits listed below must be used with an ignition ballast resistor (or loom resistance wire) to prevent module failure. If your vehicle is not equipped with a ballast resistor or loom resistance wire, Mallory Ballast Resistor (Part No. 700) or Mallory Coils 29219, 29450 or 30450 (which are internally ballasted) may be used. These kits do not work with vacuum advance distributors.
APPLICATIONS
Part No. 61004M Mallory 8 cylinder point distributors (automotive and marine) which use a standard stack cap (Part No. 209 or 209D) Mallory 8 cylinder point distributors (automotive and marine) which use a flat cap (Part No. 221 or 221B) Mallory 6 cylinder point distributors (automotive and marine) which use a standard stack cap (Part No. 270 or 270B) Mallory 6 cylinder point distributors (automotive and marine) which use a mini bowl cap (Part No. 226 or 226B) Mallory 4 cylinder point distributors (automotive and marine) which use a standard stack cap (Part No. 271 or 271B) Mallory 4 cylinder point distributors (automotive and marine) which use a mini bowl cap (Part No. 225 or 225B)
WARNING
You must install the E-Spark Conversion Kit exactly as shown in these instructions. After the kit is installed—and before you start the engine— check all wiring again. M……
