器件名称: TMP513AIDR
功能描述: Temperature and Power Supply System Monitors
文件大小: 1483.17KB 共54页
简 介:TMP512 TMP513
www.ti.com SBOS491 – JUNE 2010
Temperature and Power Supply System Monitors
Check for Samples: TMP512, TMP513
1
FEATURES
±1°C REMOTE DIODE SENSORS ±1°C LOCAL TEMPERATURE SENSOR SERIES RESISTANCE CANCELLATION n-FACTOR CORRECTION TEMPERATURE ALERT FUNCTION AVERAGING 12-BIT RESOLUTION DIODE FAULT DETECTION SENSES BUS VOLTAGES FROM 0V TO +26V REPORTS CURRENT IN AMPS, VOLTAGE IN VOLTS AND POWER IN WATTS HIGH ACCURACY: 1% MAX OVER TEMP WATCHDOG LIMITS: – Upper Over-Limit – Lower Under-Limit
DESCRIPTION
The TMP512 (dual-channel) and TMP513 (triple-channel) are system monitors that include remote sensors, a local temperature sensor, and a high-side current shunt monitor. These system monitors have the capability of measuring remote temperatures, on-chip temperatures, and system voltage/power/current consumption. The remote temperature sensor diode-connected transistors are typically low-cost, NPN- or PNP-type transistors or diodes that are an integral part of microcontrollers, microprocessors, or FPGAs. Remote accuracy is ±1°C for multiple IC manufacturers, with no calibration needed. The two-wire serial interface accepts SMBus or two-wire write and read commands. The onboard current shunt monitor is a high-side current shunt and power monitor. It monitors both the shunt drop and supply voltage. A programmable calibration value (along with the TMP512/TMP513 internal digital multiplier) enables direct readout in amps; an additional multiplication calculates power in w……
