器件名称: YTD428
功能描述: DSU LSI for the ISDN Terminal Equipment
文件大小: 183.11KB 共14页
简 介:YTD428
IDSU
DSU LSI for the ISDN Terminal Equipment
INTRODUCTION
YTD428 is a LSI which provides the ISDN subscriber interface (two-wire time compression multiplexing operation) and the NT side of the ISDN Basic Rate user-network interface function (digital four-wire time-division full-duplex operation). It is capable of providing the electric characteristics conforming to TTC Standard JT-I430 and JT-G961. YTD428 incorporates the circuit termination and line termination functions on a single chip allowing the user to easily configure a DSU (Digital Service Unit) that consumes small amount of power at a minimal cost. In addition, a TTL interface is provided at the T reference point (layer 1 level). This feature is especially effective when combined with YAMAHA's ISDN LSI for S/T reference point interface, YTD423 or YTD418. It allows considerable cost reduction on parts around the pulse transformer when constructing a device with a built-in DSU. The driver/receiver section of the T reference point interface can be separated from the DSU section and be used independently. The user can enable or disable this feature as necessary.
YTD428 CATALOG CATALOG No.:4TD428A2 2001.1
Features
s Circuit Termination Section
s
q q q
Conforms to TTC Standard JT-I430 and JT-G961 Digital four-wire time-division full-duplex operation Two-wire time compression multiplexing operation
Transmission rate at U reference point: 320 kbit/s, at T reference point: 192 kbit/s q Frame assembling and disa……
