器件名称: WM8195
功能描述: 14-bit 12MSPS CIS/CCD Analogue Front End/Digitiser
文件大小: 382.75KB 共33页
简 介:w
DESCRIPTION
The WM8195 is a 14-bit analogue front end/digitiser IC which processes and digitises the analogue output signals from CCD sensors or Contact Image Sensors (CIS) at pixel sample rates of up to 12MSPS. The device includes three analogue signal processing channels each of which contains Reset Level Clamping, Correlated Double Sampling and Programmable Gain and Offset Adjust functions. Three multiplexers allow single channel processing. The output from each of these channels is time multiplexed into a single high-speed 14-bit analogue-to-digital converter. The digital output data is available in 14-bit parallel or 8, 7 or 4-bit wide multiplexed format, with no missing codes. An internal 4-bit DAC is supplied for internal reference level generation. This may be used during CDS to reference CIS signals or during Reset Level Clamping to clamp CCD signals. Alternatively an external reference level may be applied. ADC references are generated internally, ensuring optimum performance from the device. Using an analogue supply voltage of 5V and a digital interface supply of either 5V or 3.3V, the WM8195 typically only consumes 210mW when operating from a single 5V supply and less than 20A when in power down mode.
WM8195
14-bit 12MSPS CIS/CCD Analogue Front End/Digitiser
FEATURES
14-bit ADC No missing codes guaranteed 12MSPS conversion rate Low power – 210mW typical 5V single supply or 5V/3.3V dual supply operation Single or 3 channel operation Correlated dou……
