器件名称: WM8143-10
功能描述: 10-bit/6MSPS CCD Signal Processor
文件大小: 491.99KB 共24页
简 介:WM8143-10 10-bit/6MSPS CCD Signal Processor
Production Data June 1998 Rev 3f
Description
The WM8143-10 integrates the analogue signal conditioning required by CCD sensors with a 10-bit ADC. The WM8143-10 requires minimal external circuitry and provides a cost-effective sensor to digital domain system solution. Each of the three analogue conditioning channels includes reset level clamp, CDS, fine offset level shifting and programmable gain amplification. The three channels are multiplexed into the ADC. The output from the ADC is fed to the output bus pins OP[9:0] via a 10/8 bit multiplexer, enabled by the OEB signal. The flexible output architecture allows ten-bit data to be accessed either on a ten-bit bus or via a time-multiplexed eight-bit bus. The WM8143-10 can be configured for pixel-by-pixel or line-by-line multiplexing operation. Reset level clamp and/or CDS features can be optionally bypassed. The device configuration is programmed either via a simple serial interface or via an eight-bit parallel interface. The serial/parallel interfaces of the WM8143-10 are control compatible with those of the WM8144-10 and WM8144-12.
Features
Reset level clamp Correlated double sampling (CDS) Fine offset level shifting Programmable gain amplification 10-bit ADC with maximum 6 MSPS Simple clocking scheme Control by serial or parallel interface Time multiplexed eight-bit data output mode 32 pin TQFP package Interface compatible with WM8144-10 and WM8144-12
Applications
……
