器件名称: ST7-EPB
功能描述: Programming board
文件大小: 330.17KB 共15页
简 介:STMicroelectronics
ST7-EPB Programming board
UM0028 User manual
Rev 4
June 2006
www.st.com
BLANK
UM0028 User manual
ST7-EPB Programming board
Introduction
Thanks for choosing ST7! This manual will help you setup and start using your ST7-EPB programming board. ST7-EPB programming boards allow you to program ST7 microcontrollers that have EPROM, EEPROM and FLASH memories. Your programming board links, via parallel port, to a host PC running ST7 Visual Programmer (STVP7) software. This software interface allows you to customize and control the programming of an application to your ST7. The layout of your programming board varies depending on the type of EPB you have ordered, as each programming board is designed to program a different sub-family of ST7 MCUs. Some programming boards also support either In-Circuit Programming (ICP), or In Situ Programming (ISP) of your ST7 while it is mounted on your application board.
Note:
A complete listing of the ST7 family of programming tools, including the devices and programming modes that they support is provided in ST7 Visual Programmer (STVP7° Release Notes.
Figure 1. Programming board with ICC cable
Parallel port (P1 connector)
Programming sockets
ICC cable
ICC connector (10-pin, HE-10 connector)
June 2006
UM0028 Rev 4
3/15
www.st.com
Introduction
ST7-EPB
About the user manuals...
This manual will help you setup your ST7-EPB programming board and connect it to your PC. Here, you will find:
■ ■
Setup instructions I……
