器件名称: ST20-PPI
功能描述: PC PARALLEL PORT TO OS-LINK INTERFACE
文件大小: 58.37KB 共6页
简 介:ST20-PPI
PC PARALLEL PORT TO OS-LINK INTERFACE
PRODUCT INFORMATION
FEATURES Desktop mounted parallel port to differential OS-Link interface Standard 25 way D-type parallel port connection Standard 26 way D-type differential OS-Link connection Plug top power supply Supports nibble, byte and EPP mode parallel port standards
DESCRIPTION The ST20-PPI parallel port to OS-Link interface is a host interface to allow connection from a PC parallel port to any OS-Link based ST20 development board such as the ST20450-SAB. The interface plugs into any standard PC 25 way D-type parallel port. Supported parallel port modes are: Nibble mode Byte mode EPP mode depending on which mode the host PC can support. Connection to the development target is via a differential OS-Link connector, as used on the IMS B300 and ST20450-Development Board. Once connected, the development target can be accessed with the standard ST20 Toolset using the MS Windows drivers supplied.
1/6
January 1996
42 1679 00
ST20-PPI PC Parallel Port to OS-Link Interface
1
Introduction
The ST20-PPI parallel port to OS-Link interface is a host interface to allow connection from a PC parallel port to any OS-Link based ST20 development board such as the ST20450-SAB. The interface plugs into any standard PC 25 way D-type parallel port. Supported parallel port modes are: Nibble mode Byte mode EPP mode
depending on which mode the host PC can support. Connection to the development target is via a differential O……
