器件名称: SI120M200
功能描述: SNAP-IN MOUNT ALUMINUM ELECTROLYTIC
文件大小: 21.19KB 共2页
简 介:SNAP–IN MOUNT ALUMINUM ELECTROLYTIC
SI SERIES
SUBMINIATURE (SI: Snap–in)
The SI Snap–in series subminiature aluminum electrolytic capacitors are especially suitable for applications requiring high capacitance, low cost, and very small size. In fact, you’ll find these capacitors in some of the most demanding applications, from precision medical electronics and automobiles to the newest personal computers and disk drives. They operate over a broad temperature range and are available in either blister pack or bulk.
MECHANICAL SPECIFICATIONS
Marking: Consists of series type, nominal capacitance, rated voltage, temperature range, anode and/or cathode identification, vendor identification. Recommended Cleaning Solvents: Chlorofluorocarbon solvents used to remove flux from printed circuit boards can penetrate the capacitor end– seals, cause corrosion when voltage is applied and capacitor failure. Avoid halogenated solvents and consider these alternatives: Clean the capacitors with water/detergent or cleaning solvents free of halogen groups such as alcohol or terpene solution, or mount the capacitor after board cleaning.
RATINGS
Capacitance Range: 47f to 33,000f Tolerance: ±20% Voltage Range: 16V to 450V
PERFORMANCE SPECIFICATIONS
Operating Temperature Range: –40°C to +85°C (–40°F to +185°F) Leakage Current: I ≤ 3 x √CV (measured after 5 minutes @ rated voltage and +20°C (+68°F) I = Leakage Current (A) C = Nominal Capacitance (f) V = Rated Voltage (V) Capacitance Tolerance (M): ±2……
