器件名称: P521-28
功能描述: Low Phase Noise PECL VCXO (100MHz to 200MHz)
文件大小: 110.1KB 共6页
简 介:Preliminary
P521-28
Low Phase Noise PECL VCXO (100MHz to 200MHz)
FEATURES
100MHz to 200MHz Fundamental Mode Crystal. Output range: 100MHz – 200MHz. Complementary PECL outputs. Selectable OE Logic (enable high or enable low). Integrated variable capacitors. High pull linearity: < 5%. +/- 125 ppm pull range Supports 2.5V or 3.3V-Power Supply. Available in die form. Thickness 10 mil.
DIE CONFIGURATION
57.5 mil
VDDOSC
OSCOFF
OESEL V
N/C
N/C
(1460,1435)
GNDOSC VCON XIN
18
17
16
15
14
13 12
VDDANA VDDBUF VDDBUF PECLBAR PECL GNDBUF
19 11 20 10 9 8
56.5 mil
XOUT OE
21 7 22 1 2 3 4 5 6
GNDOSC
GNDANA
GNDANA
VCON
GNDBUF
Y
(0,0)
DESCRIPTIONS
P521-28 is a VCXO IC specifically designed to pull high frequency fundamental crystals. Its internal varicaps allow an on chip frequency pulling, controlled by the VCON input. The chip provides a low phase noise, low jitter PECL differential clock output.
X
DIE SPECIFICATIONS
Name Size Reverse side Pad dimensions Thickness Value 56.5 x 57.5 mil GND 80 micron x 80 micron 10 mil
BLOCK DIAGRAM
OE VCON Oscillator X+ XQ Q
OUTPUT ENABLE LOGIC SELECTION
OESEL (Pad #14) 0 (Default) OECTRL (Pad #22) 0 (Default) 1 0 1 (Default) State Output enabled Tri-state Tri-state Output enabled
Amplifier w/ integrated varicaps
P521-28
1
Pad #14, 22: Bond to GND to set to “0”, bond to VDD to set to “1” No connection results to “default” setting through internal pull-up/-down. Pad #22: Logical states defined by PECL V I H and V……
