器件名称: P130-08QC
功能描述: High Speed Translator Buffer to PECL
文件大小: 240.09KB 共5页
简 介:PLL130-08
High Speed Translator Buffer to PECL
FEATURES Differential PECL output Single AC coupled input (min. 100mV swing). Input range from DC to 1.0 GHz. 2.5V to 3.3V operation. Available in 8-Pin SOIC or 3x3mm QFN. PIN CONFIGURATION
(TOP VIEW)
GND REF_IN GND
1 2 3 4
8 7 6 5
VDD GND PECL_BAR VDD
PLL130-08
DESCRIPTION The PLL130-08 is a low cost, high performance, high speed, buffer that reproduces any input frequency from DC to 1.0GHz. It provides a pair of differential PECL output. Any input signal with at least 100mV swing can be used as reference signal. This chip is ideal for conversion from sine wave, TTL, CMOS, or LVDS to PECL.
PECL
GND GND GND OE^
13 14 15 16
12
11
10
GND
9
VDD
VDD
VDD
8 7 6 5
PECL_BAR VDD PECL GND
PLL130-08
1 2 3 4
GND
GND
Note: ^ denotes internal pull up
BLOCK DIAGRAM
REF_IN
Input Amplifier
PECL_BAR PECL
47745 Fremont Blvd., Fremont, California 94538 Tel (510) 492-0990 Fax (510) 492-0991 www.phaselink.com Rev 09/09/04 Page 1
REF_IN
GND
PLL130-08
High Speed Translator Buffer to PECL
PIN DESCRIPTIONS
Name
GND VDD REF_IN PECL PECL_BAR OE
8pin SOIC Pin number
1,3,7 5,8 2 4 7 N/A
3x3mm QFN Pin number
1,2,4,5, 9,13,14,15 7,10,11,12 3 6 8 16
Type
P P I O O I Ground.
Description
Power supply. Reference input signal. The frequency of this signal will be reproduced at the output (after translation to PECL level). PECL True output. PECL Complementary output. Output enable (‘1’ for enable). Internal pull-up (default is……
