器件名称: P0641A_2L
功能描述: Two-chip SLIC Protector
文件大小: 151.74KB 共3页
简 介:Two-chip SLIC Protector Modified TO-220
RoHS
¨
This two-chip SLIC modified TO-220 unidirectional protector is constructed with a
1 (T) 3 (R) 2 (G)
SIDACtor device and an integrated diode. It protects SLICs (Subscriber Line Interface Circuits) from damage during transient voltage activity and enables line cards to comply with various regulatory requirements including GR 1089, ITU K.20, K.21 and K.45, IEC 60950, UL 60950, and TIA-968-A (formerly known as FCC Part 68). For details of specific design criteria, see Figure 6.40 through Figure 6.43 in Section 6, “Reference Designs” of this Telecom Design Guide.
Electrical Parameters
Part Number * P0641A_2L P0721A_2L P0901A_2L P1101A_2L P1301A_2L P1701A_2L VDRM Volts 58 65 75 95 120 160 VS Volts 77 88 98 130 160 200 VT Volts 4 4 4 4 4 4 VF Volts 5 5 5 5 5 5 IDRM Amps 5 5 5 5 5 5 IS mAmps 800 800 800 800 800 800 IT Amps 2.2 2.2 2.2 2.2 2.2 2.2 IH mAmps 120 120 120 120 120 120
Pins 1-2, 3-2
* “L” in part number indicates RoHS compliance. For non-RoHS compliant device, delete “L” from part number. For surge ratings, see table below. General Notes: All measurements are made at an ambient temperature of 25 °C. IPP applies to -40 °C through +85 °C temperature range. IPP is a repetitive surge rating and is guaranteed for the life of the product. VDRM is measured at IDRM. VS and VF are measured at 100 V/s. Special voltage (VS and VDRM) and holding current (IH) requirements are available upon request. Parallel capacitive loads may ……
