器件名称: P0640ECMC
功能描述: MicroCapacitance (MC) SIDACtor Device
文件大小: 121.23KB 共2页
简 介:MicroCapacitance (MC) SIDACtor Device
MicroCapacitance (MC) SIDACtor Device
The TO-92 MC SIDACtor series is intended for applications sensitive to load values. Typically, high speed connections require a lower capacitance. CO values for MC devices are 40% lower than a standard EC part. This MC SIDACtor series is used to enable equipment to meet various regulatory requirements including GR 1089, ITU K.20, K.21, and K.45, IEC 60950, UL 60950, and TIA-968-A (formerly known as FCC Part 68) without the need of series resistors.
Electrical Parameters
Part Number * P0640EC MC P1500EC MC P2600EC MC P3100EC MC VDRM Volts 58 140 220 275 VS Volts 77 180 300 350 VT Volts 4 4 4 4 IDRM Amps 5 5 5 5 IS mAmps 800 800 800 800 IT Amps 2.2 2.2 2.2 2.2 IH mAmps 150 150 150 150 CO pF 60 50 40 40
* For surge ratings, see table below. General Notes: All measurements are made at an ambient temperature of 25 °C. IPP applies to -40 °C through +85 °C temperature range. IPP is a repetitive surge rating and is guaranteed for the life of the product. Listed SIDACtor devices are bi-directional. All electrical parameters and surge ratings apply to forward and reverse polarities. VDRM is measured at IDRM. VS is measured at 100 V/s. Special voltage (VS and VDRM) and holding current (IH) requirements are available upon request. Off-state capacitance (CO) is measured at 1 MHz with a 2 V bias.
Surge Ratings
IPP 2x10 s Amps 500 IPP 8x20 s Amps 400 IPP 10x160 s Amps 200 IPP 10x560 s Amps 150 IPP 10x1000 ……