器件名称: OP245PS
功能描述: Plastic Point Source Infrared Emitting Diode
文件大小: 267.83KB 共3页
简 介:Plastic Point Source Infrared Emitting Diode
OP245PS
Features:
x x x x x
Point source irradiance pattern Side-looking package for space-limited applications Wavelength matched to silicon’s peak response Higher power output than GaAs at equivalent drive currents Fast switching speed
Description:
Each OP245PS device is an infrared emitting diode with a 850 nm GaAIAs chip, molded in a clear IR-transmissive side-looking epoxy package. This package makes these devices ideal for PCBoard mounted slotted switches and for mounted interrupt detectors. The stable forward VF vs TA characteristic make them suitable for applications that have limited voltage, such as battery operation; whereas, the low TR/TF makes them ideal for high-speed operations.
Please refer to Application Bulletins 208 and 210 for additional design information and reliability (degradation) data.
Applications:
x Space-limited applications x PCBoard mounted slotted
switch
x Mounted interrupt detector x High-speed applications
Ordering Information
Part Number OP245PS LED Peak Wavelength 850 nm Lens Type Flat Total Beam Angle ±18° Lead Length (min.) 0.5” / 12.7 mm
1
2
Pin #
NOTES; 1. OUTSIDE DISCRETE SHELL IS POLYSULFONE P1700-11 CLEAR. 2. THIS LED IS BUILT WITH A 0.011” X 0.011” GaAIAs CHIP. 3. MAX ALLOWABLE EPOXY MENSCUS IS 0.010”. 1 ANODE 2 CATHODE [MILLIMETERS] INCHES
LED
Anode Cathode
1 2
DIMENSIONS ARE IN:
To avoid stress cracking, we suggest using ND Industries’ Vibra-Tite for thread-locking. Vibra-Ti……
