器件名称: M-986-2R2PL
功能描述: MFC Transceivers
文件大小: 520.42KB 共13页
简 介:M-986-2R2
MFC Transceivers
Features Direct A-Law PCM digital input 2.048 Mb/s clocking Programmable forward/backward mode Programmable compelled/direct control Operates with standard codecs for analog interfacing Microprocessor read/write interface Binary or 2-of-6 data formats Single- or dual-channel versions 5 volt power Applications Test equipment Trunk adapters Paging terminals Traffic recorders PBXs Description The M-986-1R2 and -2R2 MFC Transceivers contain all the logic necessary to transmit and receive CCITT R2F (forward) and R2B (backward) multifrequency signals on one 40-pin integrated circuit (IC). M-9861R2 is a single-channel version; M-986-2R2 provides two channels. R1 single and dual multifrequency transceivers are also available as M-986-1R1 and 2R1. Operating with a 20.48 MHz crystal, the M-986 is capable of providing a direct digital interface to an Alaw-encoded PCM digital input. Each channel can be connected to an analog source using a coder-decoder (codec) as shown in the Block Diagram below. The M-986 can be configured by the customer to operate with the transmitter and receiver either coupled together or independently, allowing it to handle a compelled cycle automatically or via command from the host processor. For the R2 versions of the M-986, A-law is used for coding/decoding. The M-986 is configured and controlled through an integral coprocessor port.
Pin Assignments
Ordering Information Part # M-986-1R2P M-986-1R2PL M-986-2R2P M-986-2……
