器件名称: F10067
功能描述: RTI AUDIO FILM CAPACITORS
文件大小: 147.34KB 共4页
简 介:F10067 Series
Page 1 of 4
RTI AUDIO FILM CAPACITORS
F10067 Series - 200VDC
Metallized Polypropylene
MATERIAL: Metallized Polypropylene capacitors in non-inductive construction. LEADS: Tinned Copper soldered to capacitor with 63-37 Sn-Pb TEMPERATURE RANGE: May be operated at rated voltage from -55°C to + 85°C. Voltage must be derated linearly to 60% between +85°C to +105°C. ELECTRICAL [NON-DESTRUCTIVE] TESTS:
1. Capacitance shall be measured at 1 KHz. ± 20 Hz and + 25°C for values up to 1.0 MFD. Values
greater than 1.0 MFD. shall be measured at 120 Hz. ± 10 Hz. Ref: MIL-STD-202E, method 305.
2. Dissipation Factor shall be measured as described for capacitance and shall not exceed 0.2%. 3. Insulation Resistance shall be measured at rated voltage. After 2 minutes under voltage, minimum
values shall be 200,000 MEG/MFD., need not exceed 400,000 megohms. Ref: MIL-STD-202E, method 302.
4. Dielectric Strength: Capacitors shall withstand specified DC test potential for 60 seconds through a
limiting resistance of 1 ohm/volt. Terminal to terminal will be 150% of rated voltage. TerminaI to case will be 200 % of rated voltage.. Ref: MIL-STD-202E, method 301.
5. Dielectric Absorption shall not exceed 0.1% when tested to MIL-C-19978D.
Ref: MIL-C-19978D, paragraph 3.22.
TYPICAL TEMPERATURE CHARACTERISTICS
RHOPOINT COMPONENTS LTD Tel: +44 (0) 870 608 1188 Fax: +44 (0) 870 241 2255
F10067 Series
Page 2 of 4
P/N F10067-102 F10067-122 F10067-152 F10067-182 F10067-222 F10067-272 F100……
