功能描述: VI Chip - PRM-AL Pre-Regulator Module
文件大小: 408.14KB 共14页
PRM VI Chip – PRM-AL Pre-Regulator Module
48 V input VI Chip PRM Vin range 36 – 75 Vdc High density – 875 W/in3 Small footprint – 220 W/in2 Low weight – 0.5 oz (14 g)
Adaptive Loop feedback ZVS buck-boost regulator 1.5 MHz switching frequency 96% Efficiency 125C operation Vin = 36 – 75 V Vf = 26 – 55 V Pf = 240 W If = 5 A
The VI Chip Pre-Regulator Module (PRM) is a very efficient non-isolated regulator capable of both boosting and bucking a wide range input voltage. It is specifically designed to provide a controlled Factorized Bus distribution voltage for powering downstream VI Chip Voltage Transformation Modules (VTMs) — fast, efficient, isolated, low noise Point-of-Load (POL) converters. In combination, PRMs and VTMs form a complete DC-DC converter subsystem offering all of the unique benefits of Vicor’s Factorized Power Architecture (FPA): high density and efficiency; low noise operation; architectural flexibility; extremely fast transient response; and elimination of bulk capacitance at the Point-of-Load (POL). In FPA systems, the POL voltage is the product of the Factorized Bus voltage delivered by the PRM and the "K-factor" (the fixed voltage transformation ratio) of a downstream VTM. The PRM controls the Factorized Bus voltage to provide regulation at the POL. Because VTMs perform true voltage division and current multiplication, the Factorized Bus voltage may be set to a value that is subst……
《电子产品世界》杂志社 版权所有 北京东晓国际技术信息咨询有限公司
Copyright ©2002 ELECTRONIC ENGINEERING & PRODUCT WORLD. All rights reserved.